- 您現在的位置：買賣IC網 > PDF目錄68784 > 1345FNPD FIBER OPTIC RECEIVER PDF資料下載
參數資料
| 型號： | 1345FNPD |
| 英文描述： | FIBER OPTIC RECEIVER |
| 中文描述： | 光纖接收 |
| 文件頁數： | 11/12頁 |
| 文件大小： | 72K |
| 代理商： | 1345FNPD |
8
Agere Systems Inc.
1345-Type Receiver with
Data Sheet
Clock Recovery and Data Retiming
January 2000
PWB Layout Guidelines
s
Follow high-speed ECL design rules.
s
All high-speed output lines must be controlled-impedance lines, and the termination impedance must match
the line impedance. Controlled-impedance interruptions should be avoided (i.e., 90° bends, etc.) and paired lines
(i.e., DATA and DATA) should be of equal length.
s
Each output line should be terminated at the end of the line and must have a bypass capacitor on the voltage
side of the resistor for each termination.
s
Data and clock output lines should be as short and as straight as possible and isolated from noise sources (and
each other) to prevent noise from feeding back into the receiver.
s
Noise that couples into the receiver through the power supply pins can degrade device performance. See
Figure 2 for an example of power supply filtering for the receiver 5 V power supply pins.
s
Use a multilayer board so that the ground plane surrounds the areas occupied by the receiver and directly under-
neath it. Directly attach all pins listed as ground pins to the ground plane with no additional lead length.
All unused outputs must be terminated as shown. All resistors are 1/8 W, thin-film, ceramic chips. All capacitors are
25 Vdc, ceramic X7R or equivalent.
Qualification and Reliability
To help ensure high product reliability and customer satisfaction, Agere Systems is committed to an intensive qual-
ity program that starts in the design phase and proceeds through the manufacturing process. Optoelectronics mod-
ules are qualified to Agere Systems internal standards using MIL-STD-883 test methods and procedures and using
sampling techniques consistent with
Telcordia Technologies requirements. The 1345 series of receivers have
undergone an extensive and rigorous set of qualification tests. This qualification program fully meets the intent of
Telcordia Technologies reliability practices TR-NWT-000468 and TA-NWT-000983. In addition, the design, develop-
ment, and manufacturing facility of the Optoelectronics unit at Agere Systems is certified to be in full compliance
with the latest
ISO -9001 Quality System Standards.
相關PDF資料 |
PDF描述 |
|---|---|
| 1382675-2 | FIBER OPTIC LASER DIODE EMITTER, 1260-1350nm, THROUGH HOLE MOUNT, TO-56 |
| 1382482-2 | FIBER OPTIC TRANSMITTER, 1266-1360nm, 3125Mbps, THROUGH HOLE MOUNT, LC CONNECTOR |
| 1382676-2 | FIBER OPTIC LASER DIODE EMITTER, 1260-1350nm, THROUGH HOLE MOUNT, TO-56 |
| 1382459-1 | FIBER OPTIC TRANSMITTER, 1280-1335nm, 156Mbps, THROUGH HOLE MOUNT, SC CONNECTOR |
| 139P20.3232.FAR | UNIVERSAL JOINT |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 1345G0 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Peripheral IC |
| 1345G1 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Peripheral IC |
| 1345G16 | 功能描述:重負荷電源連接器 PP45 YELLOW #10-14 AWG RoHS:否 制造商:Hirose Connector 系列:PS2 產品類型:Connectors 位置/觸點數量: 端接類型:Crimp 觸點材料: 觸點電鍍:Gold 電壓額定值: 電流額定值:300 A 附件類型: |
| 1345G17 | 功能描述:重負荷電源連接器 PP45 ORANGE #10-14 AWG RoHS:否 制造商:Hirose Connector 系列:PS2 產品類型:Connectors 位置/觸點數量: 端接類型:Crimp 觸點材料: 觸點電鍍:Gold 電壓額定值: 電流額定值:300 A 附件類型: |
| 1345G18 | 功能描述:重負荷電源連接器 PP45 GRAY #10-14 AWG 45A 10/14 AWG CONT RoHS:否 制造商:Hirose Connector 系列:PS2 產品類型:Connectors 位置/觸點數量: 端接類型:Crimp 觸點材料: 觸點電鍍:Gold 電壓額定值: 電流額定值:300 A 附件類型: |
發布緊急采購，3分鐘左右您將得到回復。