
STANDARD PLCC SOCKETS
For Through Board Mount
www.mill-max.com
516-922-6000
92
Series 940
Ordering Information
Note: Not end stackable.
Accepts JEDEC PLCCs
MS-016 & MS-018
leaded plastic substrates.
Insulator material is
glass reinforced PPS.
Standoffs provide clear-
ance for heat dissipation
and cleaning.
Internal standoffs insure
proper positioning of chip
carrier in socket.
Contacts are plated with
150
” tin/lead.
Pre-lubricated available.
20
0.613
0.200
0.400
38
940-99-020-24-00X
28
0.713
0.300
0.500
33
940-99-028-24-00X
32* .813/.713 .400/.300 .600/.500
29
*RECTANGULAR
940-99-032-24-00X
44
0.913
0.500
0.700
26
940-99-044-24-00X
52
1.013
0.600
0.800
23
940-99-052-24-00X
68
1.213
0.800
1.000
19
940-99-068-24-00X
84
1.413
1.000
1.200
16
940-99-084-24-00X
100
1.603
1.200
1.400
25
940-99-100-24-00X
X = 0 Not Lubricated
X = 1 Pre-Lubricated
No.
of
Contacts
AB
C
Application of Pre-Lubricated Sockets:
Intended as a general-pupose lubricant for tin/lead
connectors, Nyetact 502M-20-UV is a solvent disper-
sion of a water-resistant, non-melting grease based on
a plastic-compatible, synthetic hydrocarbon oil. Useful
temperature range: -40° to 120°C. The active lubricant
is present at 20% (by weight) in mineral spirits.
The pre-lubrication increases the reliability of standard
sockets by preventing fretting corrosion.
Pre-lubricated sockets can be used for any long life
applications having a tin-tin interface.
There is no degradation of lubrication during soldering
or final wash. Contact the factory for other pre-lubricat-
ed products.
See page 96 for lubrication specifications.
Quantity
per
T
ube