
Product Specification
PE97042
Page 5 of 12
Document No. 70-0236-04
│ www.psemi.com
2007-2010 Peregrine Semiconductor Corp. All rights reserved.
Table 6. AC Characteristics: VDD = 3.3 V, -40° C < TA < 85° C, unless otherwise specified
Note 1: Fclk is verified during the functional pattern test. Serial programming sections of the functional pattern are clocked at 10 MHz to verify Fclk
specification.
Note 2: CMOS logic levels can be used to drive reference input if DC coupled. For Sin wave inputs, amplitude needs to be a minimum of 0.5Vp-p.
Note 3: Parameter is guaranteed through characterization only and is not tested.
Note 4: Parameters below are not tested for die sales. These parameters are verified during the element evaluation.
Symbol
Parameter
Conditions
Min
Typical
Max
Units
Control Interface and Latches (see Figures 1 and 9)
fClk
CLOCK Serial data clock frequency
(Note 1)
10
MHz
CLOCK Serial clock HIGH time
30
ns
tClkL
CLOCK Serial clock LOW time
30
ns
tDSU
DATA set-up time after CLOCK rising edge
10
ns
tDHLD
DATA hold time after CLOCK rising edge
10
ns
tPW
S_WR pulse width
30
ns
tCWR
CLOCK rising edge to S_WR rising edge.
30
ns
tCE
CLOCK falling edge to E_WR transition
30
ns
tWRC
S_WR falling edge to CLOCK rising edge.
30
ns
tEC
E_WR transition to CLOCK rising edge
30
ns
tMDO
MSEL data out delay after FIN rising edge
CL = 12 pf
8
ns
Main Divider (Including Prescaler) (Note 4)
PFin
Input level range
External AC coupling
275 MHz
≤ Freq ≤ 3200MHz
-5
5
dBm
External AC coupling
3.2 GHz < Freq
≤ 3.5 GHz
3.15 V
≤ VDD ≤ 3.45 V
0
5
dBm
Main Divider (Prescaler Bypassed) (Note 4)
FIN
Operating frequency
50
300
MHz
PFin
Input level range
External AC coupling
-5
5
dBm
Reference Divider
FR
Operating frequency
(Note 3)
100
MHz
PFr
Reference input power (Note 2)
Single-ended input
-2
10
dBm
Phase Detector
fc
Comparison frequency
(Note 3)
50
MHz
SSB Phase Noise (Fin = 1.9 GHz, fr = 20 MHz, fc = 20 MHz, LBW = 50 kHz, VDD = 3.3 V, Temp = 25
° C) (Note 4)
ΦN
Phase Noise
100 Hz Offset
-89
dBc/Hz
ΦN
Phase Noise
1 kHz Offset
-95
dBc/Hz
ΦN
Phase Noise
10 kHz Offset
-102
dBc/Hz
SSB Phase Noise (Fin = 1.9 GHz, fr = 20 MHz, fc = 20 MHz, LBW = 50 kHz, VDD = 3.0 V, Temp = 25
° C) (Note 4)
ΦN
Phase Noise
100 Hz Offset
-87
dBc/Hz
ΦN
Phase Noise
1 kHz Offset
-94
dBc/Hz
ΦN
Phase Noise
10 kHz Offset
-101
dBc/Hz