- 您現在的位置：買賣IC網 > PDF目錄68990 > ACPM-7311-TR1 824 MHz - 849 MHz RF/MICROWAVE NARROW BAND LOW POWER AMPLIFIER PDF資料下載
參數資料
| 型號： | ACPM-7311-TR1 |
| 元件分類： | 放大器 |
| 英文描述： | 824 MHz - 849 MHz RF/MICROWAVE NARROW BAND LOW POWER AMPLIFIER |
| 封裝： | 4 X 4 MM, 1.10 MM HEIGHT, ROHS COMPLIANT PACKAGE-10 |
| 文件頁數： | 3/18頁 |
| 文件大小： | 1002K |
| 代理商： | ACPM-7311-TR1 |
PCB Design Guidelines
The recommended ACPM-7311 PCB land pattern is shown
in Figure 18 and Figure 19. The substrate is coated with
solder mask between the I/O and conductive paddle to
protect the gold pads from short circuit that is caused by
solder bleeding/bridging.
Stencil Design Guidelines
A properly designed solder screen or stencil is required
to ensure optimum amount of solder paste is deposited
onto the PCB pads. The recommended stencil layout is
shown in Figure 20. Reducing the stencil opening can po-
tentially generate more voids. On the other hand, stencil
openings larger than 100% will lead to excessive solder
paste smear or bridging across the I/O pads or conduc-
tive paddle to adjacent I/O pads. Considering the fact
that solder paste thickness will directly affect the quality
of the solder joint, a good choice is to use laser cut stencil
composed of 0.10mm(4mils)or 0.127mm(5mils) thick
stainless steel which is capable of producing the required
fine stencil outline.
Figure 20. Solder Paste Stencil Aperture
Figure 19. Solder Mask Opening
Figure 18. Metallization
0.25
0.85
0.4
0.6
0.5
0.1
0.3mm
on 0.6mm pitch
0.7
0.5
0.55
0.85
2.4
1.8
0.6
0.5
1.6
2.0
0.85
0.4
相關PDF資料 |
PDF描述 |
|---|---|
| ACPM-7371-TR1 | 880 MHz - 915 MHz RF/MICROWAVE NARROW BAND MEDIUM POWER AMPLIFIER |
| ACPM-7813-BLK | 824 MHz - 849 MHz RF/MICROWAVE NARROW BAND MEDIUM POWER AMPLIFIER |
| ACPM-7813-TR1 | 824 MHz - 849 MHz RF/MICROWAVE NARROW BAND MEDIUM POWER AMPLIFIER |
| AD8339ACPZ-R7 | 0 MHz - 50 MHz RF/MICROWAVE I/Q DEMODULATOR |
| AD8339ACPZ-RL | 0 MHz - 50 MHz RF/MICROWAVE I/Q DEMODULATOR |
相關代理商/技術參數 |
參數描述 |
|---|---|
| ACPM-7312-BLK | 功能描述:射頻放大器 UMTS PA Module Band 5 RoHS:否 制造商:Skyworks Solutions, Inc. 類型:Low Noise Amplifier 工作頻率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 輸出截獲點:37.5 dBm 功率增益類型:32 dB 噪聲系數:0.85 dB 工作電源電壓:5 V 電源電流:125 mA 測試頻率:2.6 GHz 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:QFN-16 封裝:Reel |
| ACPM-7312-TR1 | 功能描述:射頻放大器 UMTS PA Module Band 5 RoHS:否 制造商:Skyworks Solutions, Inc. 類型:Low Noise Amplifier 工作頻率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 輸出截獲點:37.5 dBm 功率增益類型:32 dB 噪聲系數:0.85 dB 工作電源電壓:5 V 電源電流:125 mA 測試頻率:2.6 GHz 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:QFN-16 封裝:Reel |
| ACPM-7331-BLK | 功能描述:射頻放大器 UMTS1900 Power Amp Module RoHS:否 制造商:Skyworks Solutions, Inc. 類型:Low Noise Amplifier 工作頻率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 輸出截獲點:37.5 dBm 功率增益類型:32 dB 噪聲系數:0.85 dB 工作電源電壓:5 V 電源電流:125 mA 測試頻率:2.6 GHz 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:QFN-16 封裝:Reel |
| ACPM-7331-BLKR | 功能描述:射頻放大器 UMTS1900 Power Amp Module RoHS:否 制造商:Skyworks Solutions, Inc. 類型:Low Noise Amplifier 工作頻率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 輸出截獲點:37.5 dBm 功率增益類型:32 dB 噪聲系數:0.85 dB 工作電源電壓:5 V 電源電流:125 mA 測試頻率:2.6 GHz 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:QFN-16 封裝:Reel |
| ACPM-7331-OR1 | 功能描述:射頻放大器 UMTS1900 Power Amp Module RoHS:否 制造商:Skyworks Solutions, Inc. 類型:Low Noise Amplifier 工作頻率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 輸出截獲點:37.5 dBm 功率增益類型:32 dB 噪聲系數:0.85 dB 工作電源電壓:5 V 電源電流:125 mA 測試頻率:2.6 GHz 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:QFN-16 封裝:Reel |
發布緊急采購，3分鐘左右您將得到回復。