
P50
Specification
Mechanical
Weight
270 grams Phenolic / Polyester ball
700 grams Stainless steel ball
Thermoset Phenolic or polyester 50 mm, 2”
10 grams Nominal Continuous – No seal (IP40)
20 grams Nominal Continuous – Felt seal (IP51)
50 grams Nominal Continuous – PTFE seal (IP65)
60 grams Nominal Continuous - (IP65) Stainless steel ball
200N Maximum downward pressure (20 Kg) at 20
°
C
Continuous and reversible – any direction
200 RPM max
Base – PBT + 20%GF, Top ABS/PC Blend
Photo – optical encoders with LED
Horizontal to 30
°
(non – sealed units)
Horizontal to 70
°
(sealed)
Ball
Tracking Force
Ball load
Ball rotation
Ball speed
Housing material
Transducer
Mounting Position
Electrical
Standard output connector
Mating connector
Resolution
JST 2mm PH 10 way right angled header
JST 10 way CR, KR or KRD type connector Pt No PHR 10
155 pulses per ball revolution
310/155 pulses per ball revolution – switch selectable
(Other options available upon request)
3 switches Left, Middle, and Right. Connection through JST 2 mm
PH 4 way right angled header. Mating part number PHR 4
5 V DC +/- 5%
10 mA typical
20 mA typical
+ 5 V DC, 100 mA
(Quadrature)
(Protocol)
External switch inputs
Supply Voltage
Supply current (Quadrature)
(Protocol)
Optional backlighting
Environmental
Operating temperature
Storage temperature
Humidity
Vibration
Shock
Lifetime
0
°
C to +70
°
C
-25
°
C to + 85
°
C
30% min, 95% max, non condensing
5G, 2-5 KHz any plane
100G’s – duration 11mS
> 10 million ball revolutions – non sealed
> 2 million ball revolution – seal life