
W528XXX
DESIGN GUIDE
- 8 -
Instruction Set List, continued
INSTRUCTION
RANGE
DESCRIPTION
DEFAULT VALUE
Conditional
JP R0 @TGn_HIGH
0
255
If TGn (n: 1-4) status is
high level, jump to the
group entry value indicated
in R0
If TGn (n: 1-4) status is low
level, jump to the group
entry value indicated in R0
JP R0 @TGn_LOW
0
255
END
END
Stop all activity and enter
standby state
2. Mask Option Description
The mask options of the W528xxx
PowerSpeech
are used to select features that cannot be
programmed through the chip's registers. The W528xxx provides four mask options, which are listed
in the following table:
MASK OPTION
INSTRUCTION
DEMO CHIP OPTION
LED flash type
(Asynchronous/Synchronous)
LED_ASYN; (default)
LED_SYN
LED volume controlled
(No/Yes)
LED_VOL_OFF; (default)
LED_VOL_ON
If LED_VOL_ON is set, the other
mask options will be of no use
LED1: section-controlled
(Yes/No)
LED1_S_CTL; (default)
LED1_S_OFF
LED2: section-controlled
/STPC-controlled
LED2_S_CTL; (default)
LED2_STC_CTL
Notes:
1.The demo chip for the W528xxx series is the W5280.
2. The mask options can be configured automatically by the W5280.
3. Speech Equation Description
Speech equations are used to define the combination of playback sounds. The following is an
example of the speech equation format:
i: N
H4+m1*Sound1_
FL
+m2*Sound2_
FL
+[1FFFF]+...T4
END