- 您現在的位置：買賣IC網 > PDF目錄363891 > W536030A (WINBOND ELECTRONICS CORP) VOICE/ MELODY / LCD CONTROLLER PDF資料下載
參數資料
| 型號： | W536030A |
| 廠商： | WINBOND ELECTRONICS CORP |
| 元件分類： | 音頻合成 |
| 英文描述： | VOICE/ MELODY / LCD CONTROLLER |
| 中文描述： | 30 SEC, SPEECH SYNTHESIZER, XSS |
| 封裝： | COB |
| 文件頁數： | 6/12頁 |
| 文件大小： | 108K |
| 代理商： | W536030A |
Publication Release Date:April 2000
- 6 - Revision A6
COM0
COM7
O
LCD common signal output pads either 1/16 duty or 1/8 duty. The LCD frame rate
is controlled by LCDM1 register, and default value LCDM1=0111b with 64Hz
frame rate.
COM8 / PORTP.0
COM11/PORTP.3
COM12/PORTO.0
COM15/PORTO.3
DH1, DH2 (6)
O/O
LCD common signal output pads, or shared as general output by register
LCDM3.2 when in 1/8 duty mode. Default function is common function.
O/I
LCD common signal output pads, or shared as general input by register LCDM3.2
when in 1/8 duty mode. Default function is common function and PM5.2=0 to
inhibit LCD waveform abnormal.
O
Connection terminal for voltage double capacitor with 0.1uF. The DH2 connects
to capacitor positive node and DH1 negative node if polar capacitor is used.
V3 ~ V6 (6)
O
LCD COM/SEG output driving voltage. Need an external 0.1uF capacitor to every
pad terminal.
V2 (6)
I/O
Voltage regulator output pad. An external capacitor is a must. Output level can
be controlled from 0~Fh by LCDM4 register. If internal pump is enabled
(LCDM3.3=0 and default value), LCD operating voltage (VLCD) will be 4*V2 or
5*V2 depending on 1/4 bias or 1/5 bias. A limitation should be noted that VLCD
must be higher than (VDD-0.5v) to avoid chip leakage current. While external
reference voltage is selected (LCDM3.3=1), V2 pad input voltage can not be over
1.5 Volt to inhibit chip damage
.
VSSP (7)
I
Power ground for PWM or DAC playing output.
VSS (7)
I
Power ground
VDDP (7)
I
Power source for PWM or DAC playing output.
VDD (7)
I
Power ground.
(4) RD1~3 are shared as RDP/SPDATA/WRP to interface with W55XXX @W536030A/060A
(5)
@W536120A only
(6) 0.1uF is default value, and capacitor value should be larger than 0.1uF if LCD dot size over
0.5mm * 0.5mm.
(7)
External application circuit should connect together, please refer to APPLICATION CIRCUIT. To
sure chip operation properly, please bond all VDD, VDDP,VSS and VSSP pads and connect VSS
and VSSP from chip outside PCB circuit.
相關PDF資料 |
PDF描述 |
|---|---|
| W536060A | VOICE/ MELODY / LCD CONTROLLER |
| W536090A | VOICE/ MELODY / LCD CONTROLLER |
| W536030P | VOICE & MELODY CONTROLLER |
| W536060P | VOICE & MELODY CONTROLLER |
| W536030T | VOICE/MELODY/LCD CONTROLLER |
相關代理商/技術參數 |
參數描述 |
|---|---|
| W536030K | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:ViewTalkTM Family |
| W536030P | 制造商:WINBOND 制造商全稱:Winbond 功能描述:VOICE & MELODY CONTROLLER |
| W536030T | 制造商:WINBOND 制造商全稱:Winbond 功能描述:VOICE/MELODY/LCD CONTROLLER |
| W536060A | 制造商:WINBOND 制造商全稱:Winbond 功能描述:VOICE/ MELODY / LCD CONTROLLER |
| W536060K | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:ViewTalkTM Family |
發布緊急采購，3分鐘左右您將得到回復。