国产精品成人VA在线观看-国产乱妇乱子视频在播放-国产日韩精品一区二区三区在线-国模精品一区二区三区

參數資料
型號: W78L516A24DL
廠商: WINBOND ELECTRONICS CORP
元件分類: 微控制器/微處理器
英文描述: 8-BIT MICROCONTROLLER
中文描述: 8-BIT, FLASH, 20 MHz, MICROCONTROLLER, PDIP40
封裝: ROHS COMPLIANT, DIP-40
文件頁數: 16/37頁
文件大小: 256K
代理商: W78L516A24DL
W78LE516/W78L516A
- 16 -
5.13 In-System Programming Control Register (CHPCON)
CHPCON (BFH)
BIT
NAME
FUNCTION
7
SWRESET
(F04KMODE)
When this bit is set to 1, and both FBOOTSL and FPROGEN are set to 1. It will
enforce microcontroller reset to initial condition just like power on reset. This
action will re-boot the microcontroller and start to normal operation. To read
this bit in logic-1 can determine that the H/W REBOOT mode is running.
6
-
Reserve.
5
-
Reserve.
4
ENAUXRAM
1: Enable on-chip AUX-RAM.
0: Disable the on-chip AUX-RAM
3
0
Must set to 0.
2
0
Must set to 0.
1
FBOOTSL
The Program Location Select.
0: The Loader Program locates at the 64 KB AP FLASH EPROM. 4KB LD
FLASH EPROM is destination for re-programming.
1: The Loader Program locates at the 4 KB memory bank. 64KB AP FLASH
EPROM is destination for re-programming.
0
FPROGEN
FLASH EPROM Programming Enable.
= 1: enable. The microcontroller enter the in-system programming mode after
entering the idle mode and wake-up from interrupt. During in-system
programming mode, the operation of erase, program and read are
achieve when device enters idle mode.
= 0: disable. The on-chip flash memory is read-only. In-system
programmability is disabled.
H/W REBOOT Mode (Boot from LD FLASH EPROM)
By default, the W78L516 boots from AP FLASH EPROM program after a power on reset. On some
occasions, user can force the W78L516 to boot from the LD FLASH EPROM program via following
settings
.
The possible situation that you need to enter H/W REBOOT mode when the AP FLASH
EPROM program can not run properly and device can not jump back to LD FLASH EPROM to
execute in-system programming function. Then you can use this H/W REBOOT mode to force the
W78L516 jumps to LD FLASH EPROM and executes in-system programming procedure. When you
design your system, you may reserve the pins P2.6, P2.7 to switches or jumpers. For example in a
CD-ROM system, you can connect the P2.6 and P2.7 to PLAY and EJECT buttons on the panel.
When the AP FLASH EPROM program fails to execute the normal application program. User can
press both two buttons at the same time and then turn on the power of the personal computer to force
the W78L516 to enter the H/W REBOOT mode. After power on of personal computer, you can release
both buttons and finish the in-system programming procedure to update the AP FLASH EPROM code.
In application system design, user must take care of the P2, P3, ALE,
EA
and
PSEN
pin value at
reset to prevent from accidentally activating the programming mode or H/W REBOOT mode.
相關PDF資料
PDF描述
W78L516A24FL 8-BIT MICROCONTROLLER
W78L516A24LL 8-BIT MICROCONTROLLER
W78L52 8-BIT MICROCONTROLLER
W78L52-24 8-BIT MICROCONTROLLER
W78L52P-24 8-BIT MICROCONTROLLER
相關代理商/技術參數
參數描述
W78L516A24FL 功能描述:IC MCU 8-BIT 64K FLASH 44-PQFP RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器, 系列:W78 標準包裝:60 系列:PSOC® 3 CY8C38xx 核心處理器:8051 芯體尺寸:8-位 速度:67MHz 連通性:EBI/EMI,I²C,LIN,SPI,UART/USART 外圍設備:電容感應,DMA,LCD,POR,PWM,WDT 輸入/輸出數:25 程序存儲器容量:64KB(64K x 8) 程序存儲器類型:閃存 EEPROM 大小:2K x 8 RAM 容量:8K x 8 電壓 - 電源 (Vcc/Vdd):1.71 V ~ 5.5 V 數據轉換器:A/D 2x20b,D/A 4x8b 振蕩器型:內部 工作溫度:-40°C ~ 85°C 封裝/外殼:48-VFQFN 裸露焊盤 包裝:托盤
W78L516A24LL 制造商:WINBOND 制造商全稱:Winbond 功能描述:8-BIT MICROCONTROLLER
W78L516A24PL 功能描述:IC MCU 8-BIT 64K FLASH 44-PLCC RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器, 系列:W78 標準包裝:60 系列:PSOC® 3 CY8C38xx 核心處理器:8051 芯體尺寸:8-位 速度:67MHz 連通性:EBI/EMI,I²C,LIN,SPI,UART/USART 外圍設備:電容感應,DMA,LCD,POR,PWM,WDT 輸入/輸出數:25 程序存儲器容量:64KB(64K x 8) 程序存儲器類型:閃存 EEPROM 大小:2K x 8 RAM 容量:8K x 8 電壓 - 電源 (Vcc/Vdd):1.71 V ~ 5.5 V 數據轉換器:A/D 2x20b,D/A 4x8b 振蕩器型:內部 工作溫度:-40°C ~ 85°C 封裝/外殼:48-VFQFN 裸露焊盤 包裝:托盤
W78L51F-24 制造商:WINBOND 制造商全稱:Winbond 功能描述:8-BIT MICROCONTROLLER
W78L51P-24 制造商:WINBOND 制造商全稱:Winbond 功能描述:8-BIT MICROCONTROLLER