- 您現在的位置：買賣IC網 > PDF目錄363900 > W78LE365 (WINBOND ELECTRONICS CORP) 8-BIT MICROCONTROLLER PDF資料下載
參數資料
| 型號： | W78LE365 |
| 廠商： | WINBOND ELECTRONICS CORP |
| 元件分類： | 8位微控制器 |
| 英文描述： | 8-BIT MICROCONTROLLER |
| 中文描述： | 8位微控制器 |
| 文件頁數： | 19/40頁 |
| 文件大小： | 1235K |
| 代理商： | W78LE365 |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁當前第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁
W78LE365
6.9 In-System Programming (ISP) Mode
The W78LE365 equips one 64K byte of main ROM bank for application program (called APROM) and
one 4K byte of auxiliary ROM bank for loader program (called LDROM). In the normal operation, the
microcontroller executes the code in the APROM. If the content of APROM needs to be modified, the
W78LE365 allows user to activate the In-System Programming (ISP) mode by setting the CHPCON
register.
The CHPCON is read-only by default,
software
must write two specific values 87H,
then 59H sequentially to the CHPENR register to enable the CHPCON write attribute. Writing
CHPENR register with the values except 87H and 59H will close CHPCON register write
attribute.
The W78LE365 achieves all in-system programming operations including enter/exit ISP
Mode, program, erase, read ... etc, during device in the idle mode. Setting the bit CHPCON.0 the
device will enter in-system programming mode after a wake-up from idle mode. Because device
needs proper time to complete the ISP operations before awaken from idle mode, software may use
timer interrupt to control the duration for device wake-up from idle mode. To perform ISP operation for
revising contents of APROM, software located at APROM setting the CHPCON register then enter idle
mode, after awaken from idle mode the device executes the corresponding interrupt service routine in
LDROM. Because the device will clear the program counter while switching from APROM to LDROM,
the first execution of RETI instruction in interrupt service routine will jump to 00H at LDROM area. The
device offers a software reset for switching back to APROM while the content of APROM has been
updated completely.
Setting CHPCON register bit 0, 1 and 7 to logic-1 will result a software reset
to reset the CPU
. The software reset serves as a external reset. This in-system programming feature
makes the job easy and efficient in which the application needs to update firmware frequently. In some
applications, the in-system programming feature make it possible to easily update the system
firmware without opening the chassis.
SFRAH, SFRAL:
The objective address of on-chip ROM in the in-system programming mode.
SFRAH contains the high-order byte of address, SFRAL contains the low-order byte of address.
SFRFD:
The programming data for on-chip ROM in programming mode.
SFRCN:
The control byte of on-chip ROM programming mode.
SFRCN (C7)
BIT
NAME
FUNCTION
7
-
Reserve.
6
WFWIN
On-chip ROM bank select for in-system programming.
= 0: 64K bytes ROM bank is selected as destination for re-programming.
= 1: 4K bytes ROM bank is selected as destination for re-programming.
5
OEN
ROM output enable.
4
CEN
ROM chip enable.
3, 2, 1, 0
CTRL[3:0] The flash control signals
Publication Release Date: August 5, 2004
- 19 -
Revision A2
相關PDF資料 |
PDF描述 |
|---|---|
| W78LE516 | 8-BIT MICROCONTROLLER |
| W78LE516-24 | 8-BIT MICROCONTROLLER |
| W78LE516F-24 | 8-BIT MICROCONTROLLER |
| W78LE516P-24 | 8-BIT MICROCONTROLLER |
| W78LE51F-24 | 8-BIT MTP MICROCONTROLLER |
相關代理商/技術參數 |
參數描述 |
|---|---|
| W78LE365_07 | 制造商:WINBOND 制造商全稱:Winbond 功能描述:8-BIT MICROCONTROLLER |
| W78LE51 | 制造商:WINBOND 制造商全稱:Winbond 功能描述:8-BIT MTP MICROCONTROLLER |
| W78LE51_06 | 制造商:WINBOND 制造商全稱:Winbond 功能描述:8-BIT MICROCONTROLLER |
| W78LE51-24 | 制造商:WINBOND 制造商全稱:Winbond 功能描述:8-BIT MTP MICROCONTROLLER |
| W78LE516 | 制造商:WINBOND 制造商全稱:Winbond 功能描述:8-BIT MICROCONTROLLER |
發布緊急采購，3分鐘左右您將得到回復。