国产精品成人VA在线观看-国产乱妇乱子视频在播放-国产日韩精品一区二区三区在线-国模精品一区二区三区

參數資料
型號: W88112F
廠商: WINBOND ELECTRONICS CORP
元件分類: 存儲控制器/管理單元
英文描述: ATAPI CD-ROM DECODER & CONTROLLER
中文描述: IDE COMPATIBLE, CD ROM CONTROLLER, PQFP100
封裝: PLASTIC, QFP-100
文件頁數: 13/64頁
文件大小: 466K
代理商: W88112F
W88111AF/W88112F
Preliminary/Confidential
ATAPI CD-ROM Decoder & Controller
This specification is subject to change without notice.
Publication Release Date: Aug, 1996
Preliminary/ Confidential Revision A0.1
- 13 -
Bits 4, 3, 2: Reserved
Bit 1: DTEN - Data Transfer Enable
Set DTEN high enables the data transfer logic. This bit should be set before any of the following
data transfers is triggered:
Host write to the Packet FIFO
Host read from external RAM
Host read from DF0 to DF7
In order to reduce the interference of microprocessor, DTEN is also automatically enabled during
the following operation:
Trigger ADTT(17h.2)
Host issues ATAPI Packet Command(A0h) while APKTEN(18h.7) is enabled and drive is
selected
Bit 0: Reserved
INTREA - Interrupt Reason Register - (read 01h)
Bit 7: PFNEb - Packet FIFO Not Empty Interrupt Flag
This bit becomes active-low after Packet FIFO receives any data issued by the host through
ATAPI Data port. UINTb(pin 36) is activated when PFNEb becomes active-low if PFNEEN(01h.7)
is enabled. PFNEb is deactivated after the last byte is read by microprocessor through register
PFAR(00h).
Bit 6: TENDb - Transfer End Interrupt Flag
This bit becomes active-low at the end of the following data transfers:
Host writes to the Packet FIFO
Host read from external RAM
Host read from registers DF0(40h) to DF7(47h)
Flags TDIR(30h.5) and FPKT(30h.1) can be used to determine which type of transfer end occurs.
UINTb(pin36) is activated when TENDb becomes active-low if TENDEN(01h.6) is enabled.
Writing any value to register TACK(07h) deactivates this flag.
Bit 5: SRIb - Sector Ready Interrupt Flag
This bit is used to indicate that one sector is ready to be accessed. Reading register STAT3(0Fh)
deactivates SRIb.
相關PDF資料
PDF描述
W88113C ATAPI CD-ROM DECODER & CONTROLLER
W88113CD ATAPI CD-ROM DECODER & CONTROLLER
W88113CF ATAPI CD-ROM DECODER & CONTROLLER
W88227F ATAPI CD-ROM Decoder(支持ATAPI標準的CD-ROM解碼器)
W88227QD ATAPI CD-ROM Decoder(支持ATAPI標準的CD-ROM解碼器)
相關代理商/技術參數
參數描述
W88113C 制造商:WINBOND 制造商全稱:Winbond 功能描述:ATAPI CD-ROM DECODER & CONTROLLER
W88113CD 制造商:WINBOND 制造商全稱:Winbond 功能描述:ATAPI CD-ROM DECODER & CONTROLLER
W88113CF 制造商:WINBOND 制造商全稱:Winbond 功能描述:ATAPI CD-ROM DECODER & CONTROLLER
W88611P 制造商:WINBOND 制造商全稱:Winbond 功能描述:VCD 4X RF AMP/DIGITAL SERVO & DSP
W88631F 制造商:WINBOND 制造商全稱:Winbond 功能描述:VCD 4X RF AMP/DIGITAL SERVO & DSP