- 您現在的位置：買賣IC網 > PDF目錄300048 > TZ310N TRANSIL PDF資料下載
參數資料
| 型號： | TZ310N |
| 英文描述： | TRANSIL |
| 中文描述： | SCR /二極管模塊 |
| 文件頁數： | 2/11頁 |
| 文件大小： | 389K |
| 代理商： | TZ310N |
10
ATtiny4/5/9/10 [DATASHEET]
8127F–AVR–02/2013
Figure 4-5.
Single Cycle ALU Operation
4.7
Reset and Interrupt Handling
The AVR provides several different interrupt sources. These interrupts and the separate Reset Vector each have a
separate Program Vector in the program memory space. All interrupts are assigned individual enable bits which
must be written logic one together with the Global Interrupt Enable bit in the Status Register in order to enable the
interrupt.
The lowest addresses in the program memory space are by default defined as the Reset and Interrupt Vectors.
The complete list of vectors is shown in “Interrupts” on page 35. The list also determines the priority levels of the
different interrupts. The lower the address the higher is the priority level. RESET has the highest priority, and next
is INT0 – the External Interrupt Request 0.
When an interrupt occurs, the Global Interrupt Enable I-bit is cleared and all interrupts are disabled. The user soft-
ware can write logic one to the I-bit to enable nested interrupts. All enabled interrupts can then interrupt the current
interrupt routine. The I-bit is automatically set when a Return from Interrupt instruction – RETI – is executed.
There are basically two types of interrupts. The first type is triggered by an event that sets the Interrupt Flag. For
these interrupts, the Program Counter is vectored to the actual Interrupt Vector in order to execute the interrupt
handling routine, and hardware clears the corresponding Interrupt Flag. Interrupt Flags can also be cleared by writ-
ing a logic one to the flag bit position(s) to be cleared. If an interrupt condition occurs while the corresponding
interrupt enable bit is cleared, the Interrupt Flag will be set and remembered until the interrupt is enabled, or the
flag is cleared by software. Similarly, if one or more interrupt conditions occur while the Global Interrupt Enable bit
is cleared, the corresponding Interrupt Flag(s) will be set and remembered until the Global Interrupt Enable bit is
set, and will then be executed by order of priority.
The second type of interrupts will trigger as long as the interrupt condition is present. These interrupts do not nec-
essarily have Interrupt Flags. If the interrupt condition disappears before the interrupt is enabled, the interrupt will
not be triggered.
When the AVR exits from an interrupt, it will always return to the main program and execute one more instruction
before any pending interrupt is served.
Note that the Status Register is not automatically stored when entering an interrupt routine, nor restored when
returning from an interrupt routine. This must be handled by software.
When using the CLI instruction to disable interrupts, the interrupts will be immediately disabled. No interrupt will be
executed after the CLI instruction, even if it occurs simultaneously with the CLI instruction.
Total Execution Time
Register Operands Fetch
ALU Operation Execute
Result Write Back
T1
T2
T3
T4
clk
CPU
相關PDF資料 |
PDF描述 |
|---|---|
| TZ335F | TRANSIL |
| TZ530N36KOF | 1500 A, 3600 V, SCR |
| TZ630N28KOF | 1500 A, 2800 V, SCR |
| TZ740N22KOF | 1500 A, 2200 V, SCR |
| TZB6559D51 | INTERCONNECTION DEVICE |
相關代理商/技術參數 |
參數描述 |
|---|---|
| TZ310N20KOF | 功能描述:分立半導體模塊 2000V 700A SINGLE RoHS:否 制造商:Infineon Technologies 產品:Thyristor Power Modules 類型:Phase Controls 安裝風格:Screw 封裝 / 箱體:DT61 封裝: |
| TZ310N22KOF | 功能描述:分立半導體模塊 2200V 700A SINGLE RoHS:否 制造商:Infineon Technologies 產品:Thyristor Power Modules 類型:Phase Controls 安裝風格:Screw 封裝 / 箱體:DT61 封裝: |
| TZ310N24KOF | 功能描述:分立半導體模塊 2400V 700A SINGLE RoHS:否 制造商:Infineon Technologies 產品:Thyristor Power Modules 類型:Phase Controls 安裝風格:Screw 封裝 / 箱體:DT61 封裝: |
| TZ310N25KOF | 制造商:n/a 功能描述:Power Module |
| TZ310N26KOF | 功能描述:分立半導體模塊 2600V 700A SINGLE RoHS:否 制造商:Infineon Technologies 產品:Thyristor Power Modules 類型:Phase Controls 安裝風格:Screw 封裝 / 箱體:DT61 封裝: |
發布緊急采購，3分鐘左右您將得到回復。