
Microcircuit, Linear,
Dual MOSFET Drivers
,
Monolithic Silicon
SIZE
A
CAGE CODE
09WF0
W98M9640
DATE:
98-09-23
REVISION LEVEL
A
SHEET
11
4.0 Quality assurance provisions.
4.1 Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the
performance of all inspection, examination, and test requirements specified herein. Except as otherwise specified in the contract
or purchase order, the contractor may use his own or any other facilities suitable for the inspection requirements specified herein,
unless disapproved by the Government. The Government reserves the right to perform any of the inspections, examinations, or
tests set forth in this description where such inspections, examinations, and tests are deemed necessary to assure supplies and
services conform to prescribed requirements.
4.2 Contractor certification statement. The contractor shall certify and maintain objective quality evidence that the product offered
meets the requirements of this WSD, and that the product conforms to the producer's own drawings, specifications, standards,
quality assurances practices, and is the same as the product provided as a bid sample. The acquiring activity reserves the right to
require proof of such conformance prior to the first delivery and thereafter as may be otherwise provided for under the provisions
of the contract.
4.3 Certificate of conformance. A certificate of conformance shall accompany all microcircuits supplied to this WSD.
5.1 Preservation, packaging, packing, labeling, and marking. Preservation, packaging, labeling, and marking shall be as specified in
the contract or purchase order.
6.0 Notes. This section contains relevant information which is useful to buyers, users, and suppliers in the process of acquiring the
item, but is not mandatory.
6.1
Radiation Tolerance Assured (RTA) . RTA performance is not covered under the manufacturers warranty. RTA testing has been
performed and is an integral part of this drawing. The RTA performance is certified by White Sands Missile Range, Directorate
for Applied Technology, Test and Simulation (WSMR, DATTS) to the performance characteristics as specified in TABLE III
herein.
6.2 Electrical Performance over Temperature . Electrical performance over temperature ( -55°C
≤
T
A
≤
+150°C) is covered
under the manufacturers warranty. No further temperature testing is required for determining temperature related effects.
There is no certification or warrantees by WSMR,DATTS to the performance characteristics specified in TABLE II herein.