- 您現在的位置：買賣IC網 > PDF目錄363904 > W91030 (WINBOND ELECTRONICS CORP) Low Power CMOS IC For Caller indentification(用于通信中呼叫確認的低功耗CMOS集成電路芯片) PDF資料下載
參數資料
| 型號： | W91030 |
| 廠商： | WINBOND ELECTRONICS CORP |
| 元件分類： | 無繩電話/電話 |
| 英文描述： | Low Power CMOS IC For Caller indentification(用于通信中呼叫確認的低功耗CMOS集成電路芯片) |
| 中文描述： | TELEPHONE CALLING NO IDENT CKT, PDIP24 |
| 封裝： | 0.600 INCH, PLASTIC, DIP-24 |
| 文件頁數： | 2/30頁 |
| 文件大小： | 359K |
| 代理商： | W91030 |
第1頁當前第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁
Preliminary W91030
- 2 -
GENERAL DESCRIPTION
The Winbond Caller Identification device W91030, is a low power CMOS integrated circuit used to
receive physical layer signals transmitted according to Bellcore and British Telecom (BT)
specifications. There are two types of Caller Identifications, the first type is on-hook calling with caller
ID message and the second type is call on waiting. The W91030 device provides all the features and
functions of the Caller Identification specification for both these types, including FSK demodulation,
Tone Alert Signal detection and ring detection. The FSK demodulation function can demodulate Bell
202 and CCITT V.23 Frequency Shift Keying (FSK) with 1200 baud rate. The Tone Alert Signal detect
function can detect the dual tones of the Bellcore CPE* Tone Alerting Signal (CAS) and the BT
I
idle
State and Loop State Tone Alert Signal. The line reversal for BT, ring burst for CCA or ring signal for
Bellcore can be detected by the ring detector.
The operation mode of the W91030 is M-mode and C-Mode. In M-mode, the ring detect output, alert
guard time output and the FSK carrier detect output are activated on its output pin. In C-mode, the
ring detect output, alert guard time output and the FSK carrier detect output also will be reflected on
the detected output pin. The interrupt outputs only after the end of the alert guard time when the dual
tone alert signal has been detected.
There are two modes of FSK data output interface. The first mode is a data transfer activated by the
device, whose clock and data change depending upon the changing frequency of the FSK analog
signal input. The second mode allows a microcontroller to extract 8-bit data from the device serially;
the device notifies the micro-controller when 8-bit data has been received.
Note: "CPE*" Customer Primises Equipment
FEATURES AND APPLICATIONS
Features
Compatible with Bellcore TR-NWT-000030 & SR-TSV-002476, British Telecom (BT) SIN227, U.K.
Cable Communications Association (CCA) specification
Ring and line reversal detection
Bellcore CPE Alerting Signal (CAS) and BT idle State and Loop State Tone Alerting Signal
detection
use dual tone alerting signal detector
BELL 202 and CCITT V.23 FSK demodulation with 1200 baud rate
Use 3.579545 MHz crystal or ceramic resonator
Low power CMOS technology with sleep mode
High input sensitivity
Variable gain input amplifier
FSK carry detect output
M-mode and C-mode operation modes
Two modes for 3-wire FSK data interface
Packaged in 24-pin 0.6 inch (600 mil) plastic DIP
相關PDF資料 |
PDF描述 |
|---|---|
| W91031 | LOW POWER CMOS INTERGRATED CIRCUIT |
| W91031S | Calling Line Identifier |
| W91080 | Tone/Pulse Dialer With Handfree And Keytone Fuctions And One Number Memory(具有一個數碼存儲器免提和主鍵音功能的音頻/脈沖撥號器) |
| W91080A | Tone/Pulse Dialer With Handfree And Keytone Fuctions And One Number Memory(具有一個數碼存儲器免提和主鍵音功能的音頻/脈沖撥號器) |
| W91082N | Tone Generator With μC Serial Interface(具有微控制器接口的音頻發生器) |
相關代理商/技術參數 |
參數描述 |
|---|---|
| W91030B | 制造商:WINBOND 制造商全稱:Winbond 功能描述:CALLING LINE IDENTIFIER |
| W91030B/BS | 制造商:WINBOND 制造商全稱:Winbond 功能描述:Calling Line Identifier |
| W91031 | 制造商:WINBOND 制造商全稱:Winbond 功能描述:LOW POWER CMOS INTERGRATED CIRCUIT |
| W91031S | 制造商:WINBOND 制造商全稱:Winbond 功能描述:Calling Line Identifier |
| W91031SG | 功能描述:IC CALL LINE IDENT 24-SOIC RoHS:是 類別:集成電路 (IC) >> 接口 - 電信 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS 產品變化通告:Product Discontinuation 06/Feb/2012 標準包裝:750 系列:* |
發布緊急采購，3分鐘左右您將得到回復。