- 您現在的位置：買賣IC網 > PDF目錄363900 > W79E225APG (WINBOND ELECTRONICS CORP) 8-BIT MICROCONTROLLER PDF資料下載
參數資料
| 型號： | W79E225APG |
| 廠商： | WINBOND ELECTRONICS CORP |
| 元件分類： | 微控制器/微處理器 |
| 英文描述： | 8-BIT MICROCONTROLLER |
| 中文描述： | 8-BIT, FLASH, 40 MHz, MICROCONTROLLER, PQCC44 |
| 封裝： | ROHS COMPLIANT, PLASTIC, LCC-44 |
| 文件頁數： | 87/200頁 |
| 文件大小： | 3644K |
| 代理商： | W79E225APG |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁第48頁第49頁第50頁第51頁第52頁第53頁第54頁第55頁第56頁第57頁第58頁第59頁第60頁第61頁第62頁第63頁第64頁第65頁第66頁第67頁第68頁第69頁第70頁第71頁第72頁第73頁第74頁第75頁第76頁第77頁第78頁第79頁第80頁第81頁第82頁第83頁第84頁第85頁第86頁當前第87頁第88頁第89頁第90頁第91頁第92頁第93頁第94頁第95頁第96頁第97頁第98頁第99頁第100頁第101頁第102頁第103頁第104頁第105頁第106頁第107頁第108頁第109頁第110頁第111頁第112頁第113頁第114頁第115頁第116頁第117頁第118頁第119頁第120頁第121頁第122頁第123頁第124頁第125頁第126頁第127頁第128頁第129頁第130頁第131頁第132頁第133頁第134頁第135頁第136頁第137頁第138頁第139頁第140頁第141頁第142頁第143頁第144頁第145頁第146頁第147頁第148頁第149頁第150頁第151頁第152頁第153頁第154頁第155頁第156頁第157頁第158頁第159頁第160頁第161頁第162頁第163頁第164頁第165頁第166頁第167頁第168頁第169頁第170頁第171頁第172頁第173頁第174頁第175頁第176頁第177頁第178頁第179頁第180頁第181頁第182頁第183頁第184頁第185頁第186頁第187頁第188頁第189頁第190頁第191頁第192頁第193頁第194頁第195頁第196頁第197頁第198頁第199頁第200頁
Preliminary W79E225A/227A Data Sheet
Publication Release Date: December 14, 2007
- 87 -
Revision A2.0
9. POWER MANAGEMENT
The W79E225/227 provides idle mode and power-down mode to control power consumption. These
modes are discussed in the next two sections.
9.1 Idle Mode
The user can put the device into idle mode by writing 1 to the bit PCON.0. The instruction that sets the
idle bit is the last instruction that will be executed before the device goes into Idle Mode. In the Idle
mode, the clock to the CPU is halted, but not to the Interrupt, Timer, Watchdog timer, PWM, ADC and
Serial ports blocks. This forces the CPU state to be frozen; the Program counter, the Stack Pointer,
the Program Status Word, the Accumulator and the other registers hold their contents. The ALE and
PSEN
pins are held high during the Idle state. The port pins hold the logical states they had at the time
Idle was activated. The Idle mode can be terminated in two ways. Since the interrupt controller is still
active, the activation of any enabled interrupt can wake up the processor. This will automatically clear
the Idle bit, terminate the Idle mode, and the Interrupt Service Routine (ISR) will be executed. After the
ISR, execution of the program will continue from the instruction which put the device into Idle mode.
The Idle mode can also be exited by activating the reset. The device can be put into reset either by
applying a high on the external RST pin, a Power on reset condition or a Watchdog timer reset. The
external reset pin has to be held high for at least two machine cycles i.e. 8 clock periods to be
recognized as a valid reset. In the reset condition the program counter is reset to 0000h and all the
SFRs are set to the reset condition. Since the clock is already running there is no delay and execution
starts immediately. In the Idle mode, the Watchdog timer continues to run, and if enabled, a time-out
will cause a watchdog timer interrupt which will wake up the device. The software must reset the
Watchdog timer in order to preempt the reset which will occur after 512 clock periods of the time-out.
When the device is exiting from an Idle mode with a reset, the instruction following the one which put
the device into Idle mode is not executed. So there is no danger of unexpected writes.
9.2 Power Down Mode
The device can be put into Power Down mode by writing 1 to bit PCON.1. The instruction that does
this will be the last instruction to be executed before the device goes into Power Down mode. In the
Power Down mode, all the clocks are stopped and the device comes to a halt. All activity is completely
stopped and the power consumption is reduced to the lowest possible value. In this state the ALE and
PSEN
pins are pulled low (if PWDNH=0). The port pins output the values held by their respective
SFRs.
The device will exit the Power Down mode with a reset or by an external interrupt pin enabled
(external interrupts 0 and 1). An external reset can be used to exit the Power down state. The high on
RST pin terminates the Power Down mode, and restarts the clock. The program execution will restart
from 0000h. In the Power down mode, the clock is stopped, so the Watchdog timer cannot be used to
provide the reset to exit Power down mode.
The device can be waken up from the Power Down mode by forcing an external interrupt pin
activation, provided the corresponding interrupt is enabled, while the global enable (EA) bit is set. If
these conditions are met, then either a low-level or a falling-edge at external interrupt pin will re-start
the oscillator. The device will then execute the interrupt service routine for the corresponding external
interrupt. After the interrupt service routine is completed, the program execution returns to the
instruction after one which put the device into Power Down mode and continues from there.
相關PDF資料 |
PDF描述 |
|---|---|
| W79E227A | 8-BIT MICROCONTROLLER |
| W79E227AFG | 8-BIT MICROCONTROLLER |
| W79E227APG | 8-BIT MICROCONTROLLER |
| W79E532 | 8-BIT MICROCONTROLLER |
| W79E532A40DL | 8-BIT MICROCONTROLLER |
相關代理商/技術參數 |
參數描述 |
|---|---|
| W79E226AFG | 制造商:WINBOND 制造商全稱:Winbond 功能描述:8-bit Microcontroller |
| W79E226ALG | 制造商:Nuvoton Technology Corp 功能描述:IC MCU 32K EPROM FLASH 48LQFP |
| W79E226APG | 制造商:Nuvoton Technology Corp 功能描述:IC MCU 32K EPROM FLASH 44PLCC |
| W79E227A | 制造商:WINBOND 制造商全稱:Winbond 功能描述:8-bit Microcontroller |
| W79E227AFG | 制造商:WINBOND 制造商全稱:Winbond 功能描述:8-bit Microcontroller |
發布緊急采購，3分鐘左右您將得到回復。