- 您現在的位置：買賣IC網 > PDF目錄363901 > W79E648 (WINBOND ELECTRONICS CORP) Fast 8051 Compatible microcontroller with a redesigned Processor PDF資料下載
參數資料
| 型號： | W79E648 |
| 廠商： | WINBOND ELECTRONICS CORP |
| 英文描述： | Fast 8051 Compatible microcontroller with a redesigned Processor |
| 中文描述： | 快速8051兼容微控制器重新設計的處理器 |
| 文件頁數： | 37/80頁 |
| 文件大小： | 407K |
| 代理商： | W79E648 |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁當前第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁第48頁第49頁第50頁第51頁第52頁第53頁第54頁第55頁第56頁第57頁第58頁第59頁第60頁第61頁第62頁第63頁第64頁第65頁第66頁第67頁第68頁第69頁第70頁第71頁第72頁第73頁第74頁第75頁第76頁第77頁第78頁第79頁第80頁
Preliminary W79E648
Publication Release Date: 05/31/2004
- 37 - Revision A1
Table 6. SFR Reset Value, continued
SFR Name
SCON
Reset Value
00000000b
xxxxxxxx
b
SFR Name
B
Reset Value
00000000b
SBUF
EIP
xxx00000b
P2
11111111b
PWMCON1
00000000b
PWMCON2
00000000b
PWM0
00000000b
PWM1
00000000b
PWM2
00000000b
PWM3
00000000b
PWM4
00000000b
PWM5
00000000b
The WDCON SFR bits are set/cleared in reset condition depending on the source of the reset.
External reset
Watchdog reset
WDCON
0x0x0xx0b
0x0x01x0b
The POR bit WDCON.6 is set only by the power on reset. The WTRF bit WDCON.2 is set when the
Watchdog timer causes a reset. A power on reset will also clear this bit. The EWT bit WDCON.1 is
cleared by power on resets. This disables the Watchdog timer resets. A watchdog or external reset
does not affect the EWT bit.
Power on reset
01000000b
9. INTERRUPTS
The W79E648 has a two priority level interrupt structure with 11 interrupt sources. Each of the
interrupt sources has an individual priority bit, flag, interrupt vector and enable bit. In addition, the
interrupts can be globally enabled or disabled.
Interrupt Sources
The External Interrupts
INT0
and
INT1
can be either edge triggered or level triggered, depending on
bits IT0 and IT1. The bits IE0 and IE1 in the TCON register are the flags which are checked to
generate the interrupt. In the edge triggered mode, the INTx inputs are sampled in every machine
cycle. If the sample is high in one cycle and low in the next, then a high to low transition is detected
and the interrupts request flag IEx in TCON is set. The flag bit requests the interrupt. Since the
external interrupts are sampled every machine cycle, they have to be held high or low for at least one
complete machine cycle. The IEx flag is automatically cleared when the service routine is called. If the
level triggered mode is selected, then the requesting source has to hold the pin low till the interrupt is
serviced. The IEx flag will not be cleared by the hardware on entering the service routine. If the
interrupt continues to be held low even after the service routine is completed, then the processor may
acknowledge another interrupt request from the same source.
相關PDF資料 |
PDF描述 |
|---|---|
| W79E802 | 8-BIT MICROCONTROLLER |
| W79E802A | 8-BIT MICROCONTROLLER |
| W79E802ADG | 8-BIT MICROCONTROLLER |
| W79E802ASG | 8-BIT MICROCONTROLLER |
| W79E803 | 8-BIT MICROCONTROLLER |
相關代理商/技術參數 |
參數描述 |
|---|---|
| W79E658A40FL | 制造商:Nuvoton Technology Corp 功能描述:IC MCU 8BIT 100QFP |
| W79E659A40FL | 制造商:Nuvoton Technology Corp 功能描述:IC MCU 8BIT 100QFP |
| W79E802 | 制造商:WINBOND 制造商全稱:Winbond 功能描述:8-BIT MICROCONTROLLER |
| W79E802A | 制造商:WINBOND 制造商全稱:Winbond 功能描述:8-BIT MICROCONTROLLER |
| W79E802ADG | 制造商:WINBOND 制造商全稱:Winbond 功能描述:8-BIT MICROCONTROLLER |
發布緊急采購，3分鐘左右您將得到回復。