- 您現在的位置：買賣IC網 > PDF目錄363893 > W66910CD (WINBOND ELECTRONICS CORP) TE Mode ISDN S/T-Controller with Microprocessor Interface PDF資料下載
參數資料
| 型號： | W66910CD |
| 廠商： | WINBOND ELECTRONICS CORP |
| 元件分類： | 通信及網絡 |
| 英文描述： | TE Mode ISDN S/T-Controller with Microprocessor Interface |
| 中文描述： | SPECIALTY TELECOM CIRCUIT, PQFP100 |
| 封裝： | 14 X 20 MM, 1.40 MM HEIGHT, QFP-100 |
| 文件頁數： | 37/81頁 |
| 文件大小： | 681K |
| 代理商： | W66910CD |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁當前第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁第48頁第49頁第50頁第51頁第52頁第53頁第54頁第55頁第56頁第57頁第58頁第59頁第60頁第61頁第62頁第63頁第64頁第65頁第66頁第67頁第68頁第69頁第70頁第71頁第72頁第73頁第74頁第75頁第76頁第77頁第78頁第79頁第80頁第81頁
Data Sheet
W66910 PCI ISDN S/T-Controller
Publication Release Date:
Feb,2001
Revision 1.0
-37 -
n addition, flag recognition, CRC check and zero bit deletion are also performed. The result of CRC check is indicated in
Bn_STAR: CRCE bit. The data between opening flag and CRC field (not included) is stored in receive FIFO. Two interrupts are
used for the reception of data. The RMR interrupt in Bn_EXIR register indicates at least a threshold block of data have been put
in the receive FIFO. The RME interrupt in Bn_EXIR register indicates the end of frame has been received. The micro-processor
can read out a threshold length of data from receive FIFO at RMR interrupt, or all the data in receive FIFO at RME interrupt. At
each RMR/ RME interrupt, micro-processor must issue a Receive Message Acknowledgement(RACK) command to explicitly
acknowledge the interrupt.
The microprocessor reaction time for RMR/ RME interrupt depends on the FIFO threshold setting and B channel data rate. For
example, it is 8 ms if the FIFO threshold is 64 and the B channel data rate is 64 kbps.
f the microprocessor is late in handling the interrupt, the incoming additional bytes will result in a "data overflow" interrupt and
status bit.
Extended transparent mode
: In this mode, all data received are stored in the receive FIFO without any modification. Every time
up to a threshold length of data has been stored in the FIFO, a Bn_RMR interrupt is generated.
n this mode, there is no RME interrupt.
The microprocessor must react to the RMR interrupt in time, otherwise a "data overflow" interrupt and status bit will be
generated.
7.7.2 Transmission of Frames in B Channel
A 128-byte FIFO is provided in the transmit direction. The FIFO threshold can be set at 64 or 96 bytes. The transmitter and
receiver use the same FIFO threshold setting.
The transmit operations differ in both modes:
Transparent mode
:
n this mode, the following functions are performed by the transmitter automatically:
Flag generation
CRC generation
Zero bit insertion
The fields such as address, control and information are provided by the microprocessor and are stored in transmit FIFO. To start
the frame transmission, the microprocessor issues a XMS (Transmit Message Start) command. The transmitter requests another
block of data via XFR interrupt when more than a threshold length of vacancies are left in the FIFO.The micro-processor then
writes up to a threshold length of data into the FIFO and activates the subsequent transmission of the frame by a XMS command
too. The microprocessor indicates the end of the frame transmission by issuing XME (Transmit Message End) and XMS
commands at the same time. The transmitter then transmits all the data left in the transmit FIFO and appends the CRC and
closing flag. After this, a XFR interrupt is generated.
相關PDF資料 |
PDF描述 |
|---|---|
| W6691 | ISDN S/T Interface Transceiver |
| W6691CD | ISDN S/T Interface Transceiver |
| W6691CP | ISDN S/T Interface Transceiver |
| W6692 | PCI Bus ISDN S/T Interface Controller(PCI總線的ISDN S/T接口控制器) |
| W6693A | USB Bus ISDN S/T Interface Controller(USB總線的ISDN S/T接口控制器) |
相關代理商/技術參數 |
參數描述 |
|---|---|
| W6691CD | 制造商:WINBOND 制造商全稱:Winbond 功能描述:ISDN S/T Interface Transceiver |
| W6691CP | 制造商:WINBOND 制造商全稱:Winbond 功能描述:ISDN S/T Interface Transceiver |
| W6692 | 制造商:WINBOND 制造商全稱:Winbond 功能描述:PCI Bus ISDN S/T-Controller |
| W6692A | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:TE Mode S/T Controller with PCI 2.2 Interface and ACPT |
| W6692ACD | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:ISDN LINE INTERFACE|BASIC|CMOS|QFP|100PIN|PLASTIC |
發布緊急采購，3分鐘左右您將得到回復。